TM 10-8110-202-13 & P
2. Remove ten screws (1) that secure bearing
plate (2).
3. Remove bearing plate (2) and swivel plate
(3).
4. Remove 21 screws (4) that secure closure
ring (5).
Sometimes the drum body will stick
to the closure ring. Care should be
taken to avoid damaging drum body
when removing closure ring.
5. Carefully remove closure ring (5).
6. Reach inside drum body (8) and disconnect three cable assemblies (6) from closure plate (7).
7. Remove closure plate (7) from inside drum body (8).
8. Repeat steps 1 through 7 above for the other end of drum, then go on to INSPECTION.
Change 1
5-7