TM 10-8110-202-13 & P
5. Place closure ring (5) onto closure
plate (7) and aline the chalk marks.
6. Attach closure ring (5) to closure
plate (7) using 21 screws (1).
7. Tighten screws (1) to 45 foot-
pounds maximum torque.
8.
9.
10.
11.
12.
13.
14.
Place swivel plate (3) on closure
plate (7).
Attach bearing plate (2) to closure
plate (7) with ten screws (1).
Tighten screws (1) to 45 foot.
pounds maximum torque.
When assembling the opposite side of drum, it is very im-
portant to aline the chalk marks to prevent twisting of
cable assemblies (6).
Repeat ASSEMBLY steps 1 through 10 to assemble the opposite end of the drum, then proceed
to step 12 below. Make sure that cable assemblies (6) are not twisted when assembling
opposite end of drum.
Install both adapter assemblies (para 4-11).
Install both coupler valves (para 3-4).
Test drum in accordance with paragraph 5-5.
5-10