TM 10-8110-202-13 & P
c. Patch 3. Cut a third patch from 42153 patch material that is 1/2 inch larger than patch 2
in all directions.
d. Patch 4. Cut a fourth patch from 0.030 inch thick 3156 gum 1/2 inch larger than patch 3
in all directions.
8. Apply the four patches over exterior of hole as follows:
a.
b.
c.
d.
Apply one coat of 3918 cement to one side of patch 1 and allow to dry.
Position and center patch 1 over hole with the cement side down.
Roll and stitch patch 1 thoroughly using a roller and stitcher.
Apply one coat of 3918 cement to top side of patch 1 and allow to dry.
5-24
