TM 10-8110-202-13 & P
e.
f.
9.
h.
i.
j.
k.
1.
m.
n.
Apply one coat of 3918 cement to one side of patch 2 and allow to dry.
Position and center patch 2 over patch 1 with the cement side down.
Roll and stitch patch 2 thoroughly using a roller and
Apply one coat of 3918 cement to top side of patch
Apply one coat of 3918 cement to one side of patch
stitcher.
2 and allow to dry.
3 and allow to dry.
Position and center patch 3 over patch 2 with the cement side down.
Roll and stitch patch 3 thoroughly using a roller and stitcher.
Apply one coat of 3918 cement to one side of patch 4 and allow to dry.
Position and center patch 4 over patch 3 with the cement side down.
Roll and stitch patch 4 thoroughly using a roller and stitcher.
NOTE
Exterior repair is now complete. Proceed to interior repair
instructions, following.
INTERIOR REPAIR:
1.
2.
3.
4.
Remove all dirt from area around hole to be repaired.
Wash with mild non-toxic detergent and water.
Using a buffing tool, thoroughly buff an area 5 inches in all directions from
hole.
Remove buffing dust and wash area with non-toxic detergent and water.
the edge of the
5-25
