TM 5-3820-256-10 Table 2-16.  Truck Preventive Maintenance Checks and Services ITEM INTERVAL Item to be Procedures Equipment is NO. Inspected Check for and have repaired not ready/ B  D  A  W  M or adjusted as necessary. available if: 1 X Cab/body group Check for dents, damage, rust, or corrosion to the truck exterior and undercarriage. X Check interior of truck for damage. Check control console for broken or damaged knobs or handles. 2 X Windshield wiper/washer Check wiper blades for wear.  Replace worn or damaged wiper blades. X Check fluid level in windshield washer reservoir.  Add washer fluid (or water) as necessary. 3 X Foot controls Check pedals for ease of movement. Brake pedal travels Check brake pedal travel to insure to floor without proper braking action.  Remove any stopping. mud accumulations. 4 X Shift Lever With clutch engaged, check shift operation. 5 X Steering group Check power steering fluid level.  Add fluid as required. 6 X X Exhaust system Check tailpipe and muffler for signs of corrosion or damage.  Inspect manifolds for rust or corrosion. 7 X Radiator Check level of coolant.  Add anti- Coolant level is very freeze as required to fill.  Check low. around inlet and outlet for signs of leakage.  Check for obstructions in the fins; remove if any. 8 X Drive belts Check the condition of belts; look for fraying or cracking.  Check that belts are properly adjusted.  Tighten if necessary. 9 X Steering pump Check for signs of fluid leaking from the hose connections. X While driving, listen for unusual noises during turns. 10 X Alternator While driving, check voltmeter for correct indication. 11 X Starter motor While starting engine, listen for un- usual noises.  Clicking sounds may indicate a bad motor or solenoid. 2-33