SERVICE MANUAL
Fig. 4. Removing Inter-Axle Diff
1
Intermediate Case
2
Inter-Axle Differential Assembly
2.
Remove inter-axle diff cover bolts and lift inter-
axle
diff
assembly
from
power
divider
intermediate case (Fig. 4).
3.
Remove intermediate case-to-diff carrier bolts
and lift intermediate case from diff carrier (Fig.
5).
Disassemble Inter-Axle Differential
1.
Secure input (companion) flange with a flange
holder tool or by clamping in vise (Fig. 6).
2.
Use torque multiplier wrench (SE-1933) as
shown in Fig. 6 and remove input flange nut.
3.
Use puller tool (Fig. 7) or press and remove
inter-axle diff assembly from cover (nose cone)
and input flange.
Fig. 5. Removing Power Divider Intermediate Case
Assembly
1
Pinion Bearing Cage
3
Idler Gear
2
Intermediate Case
4
Driven Gear
Fig. 6. Removing Input Flange Nut
1
Torque Multiplier Wrench
CTS-4044
PRINTED IN UNITED STATES OF AMERICA
Page 5
