TM 5-3825-226-24
GOVERNOR CONTROL LEVER AT:
PRESSURE
PRESSURE TAP
LOCATION
MINIMUM SETTING
MAXIMUM SETTING
ADJUSTMENT
Pump
(F)
260 psi (18.3 kg/cm2) (1793 kPa)
310 + 15 psi (21.8 + 1.1 kg/cm2)
NONE. Adjustment is
Filter Cover
Minimum. Check in all forward and
(213 7 + 103 kPa). Check in all
controlled by the
reverse speeds.
forward and reverse speeds.
modulation relief
valve.
Speed Clutch
(D) P1
73 + 3 psi (5.1 + 0.21 kg/cm2) (503
Add or remove spacers
(Primary
Pressure Control
+ 21 kPa) with selector lever in
(21) behind modulation
Setting)
Valve
NEUTRAL.
relief valve (2). See
spacer chart.
Speed Clutch
(D) P1
260 psi (18.3 kg/cm2) (1793 kPa)
310 + 15 psi (21.8 + 1.1 kg/cm2)
NONE. Adjustment is
Pressure Control
Minimum. Check in all forward and
(2137 + 103 kPa). Check in all
controlled by the
Valve
reverse speeds.
forward and reverse speeds.
modulation relief
valve.
Direction
(E) P2
50 + 8 psi (3.5 + 0.6 kg/cm2) (345
50 + 8 psi (3.5 + 0.6 kg/cm2) (345
NONE.
Clutch
Pressure Control
+ 55 kPa) less than the pressure of
+ 55 kPa) less than the pressure of
Valve
the speed clutch. Check in all
the speed clutch. Check in all
forward and reverse speeds.
forward and reverse speeds.
Transmission
(C)
1 psi (0.1 kg/cm2) (7 kPa)
10 + 3 psi (0.7 + 0.2 kg/cm2) (69 +
NONE.
Lubrication
On transfer
Minimum. Check in all forward and
21 kPa). Check in all forward and
Oil
gear case
reverse speeds.
reverse speeds.
Outlet from
(B)
2 psi (0.1 kg/cm2) (14 kPa)
40 + 5 psi (2.8 + 0.4 kg/cm2) (276
NONE.
the Torque
On converter
Minimum with selector lever in
+ 35 kPa) with selector lever in
Controlled by
Converter
housing near
THIRD SPEED forward, brakes
THIRD SPEED forward, brakes
orifice.
outlet line to
activated and converter stalled.
activated and converter stalled.
oil cooler
Inlet to the
(A) P3
115 psi (8.1 kg/cm2) (793 kPa)
NONE.
Torque
Pressure Control
Maximum.
Converter:
Valve
BENCH TEST
for correct
operation
2-98