TM 5-3825-226-24
SHUTOFF HOUSING
REMOVE SHUTOFF HOUSING
CAUTION:
Before any service work is to be
done on the fuel system, the outer
surface
of
the
injection
pump
housing must be clean.
NOTE:
Illustrations
show
fuel
injection
pump
housing
and
governor
removed from engine. Service work
can be done with it installed on
engine.
1.
Remove flange (1) and flange assembly (2)
from the cover (3).
2.
Remove the seven bolts and remove cover (3)
from the pump housing.
3.
Remove solenoid (4) from the cover.
4.
Remove cover (6).
5.
Remove two bolts (5) that hold the cover to
shutoff housing (7).
6.
Remove the cover from the shutoff housing (7).
7.
Remove lever (10) from shaft (11).
8.
Remove shaft (9) from the shutoff housing.
9.
Remove lever (8) from shaft (11).
10.
Remove shaft (11) from the shutoff housing.
11.
Remove seal (12) from the shutoff housing.
3-63
