TM 5-3825-226-24FUEL INJECTION LINES AND AIR INLET MANIFOLD6.Make sure the fuel injection lines are clean anddry.7.Put fuel injection lines (12) in position on theengine and connect them to their respective fuelinjection pumps, adapters and fuel filter base.8.Put fuel injection lines (13) in position on theengine and connect them to their respective fuelinjection pumps and adapters.9.Install the bolt through the bracket for fuelinjection lines (13) that holds the air inletmanifold.10.Tighten the nuts for fuel injection lines (12) and(13) to a torque of 30 ± 5 lb. ft. (40 ± 7 N•m).11.Install hose (14) between the air inlet manifoldand the crankcase ventilator valve. Tighten theclamps to a torque of 20 ± 5 lb. in. (2.3 ± 0.6N•m).12.Put tube assembly (15) in position with thehoses and tighten the clamps to a torque of 18 ±5 lb. ft. (24 ± 7 N•m).13.Remove (bleed) the air from the fuel system.CAUTIONIf new fuel lines are used forreplacement, remove theidentification tags from the lines.The tags can causewear on the fuelinjection lines.3-58
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
