TM 5-3825-226-24
ENGINE
11.
Remove the bolt from the frame at the base of
the hydraulic tank to disconnect ground cable
(19), alternator wire (20) and starting motor wire
(11 ).
12.
Put identification on electric wires as to their
location on the alternator and disconnect wires
(21).
13.
Disconnect hose (22) from the air compressor
governor. Disconnect hose assembly (23) from
the air compressor.
14.
Loosen the clamp and disconnect hose (29)
from the air cleaner housing.
15.
Loosen clamps (24), (27) and (28) and remove
hose (26), tube assembly (25) and the hoses
from the machine.
16.
Disconnect wire (33) from the fuel shut-off
solenoid.
17.
Disconnect rod end (3 1) from the governor
control lever.
18.
Remove rod end (31), the locknut,
two
grommets (32), the two locknuts and one
lockwasher to remove the governor control
cable from the back of bracket (30).
3-133
