TM 5-3825-226-24
HYDRAULIC OIL FILTER BYPASS VALVE
REMOVE HYDRAULIC OIL FILTER
BYPASS VALVE
Tools Needed
A
1P3527
Valve Spring Compressor
1
WARNING:
Release
the
pressure
from
the
hydraulic system.
1.
To remove cover (1) from the hydraulic filter
housing, see REMOVE HYDRAULIC TANK OIL
FILTERS AND HOUSING, Step I for details.
2.
Remove seal (2) from the cover.
3.
Put cover(l) in a vise as shown. Install a 34 "-10
NC nut and a washer on the end of bolt (4) as
shown for safety. Pull the springs together with
tool (A) and remove pin (3) from the bolt.
Release the tension on the springs with tool (A)
and remove the nut and washer from the end of
the bolt.
4.
Remove retainer, two springs, two valves and
cover from the bolt.
5.
Remove O-ring seal (5) from bolt (4).
INSTALL HYDRAULIC OIL FILTER
BYPASS VALVE
Tools Needed
A
1P3527
Valve Spring Compressor
1
NOTE:
Put SAE 10 oil on all of the seals
before the hydraulic oil filter valve is
assembled.
1.
Install O-ring seal (1) on bolt (2).
3-266
