TM 5-3825-226-24
TRACTOR WHEEL ASSEMBLIES, BEARING AND SEALS
7.
Remove the outer half of the Duo-Cone floating
seal (3) and the toric sealing ring retainer from the
wheel assembly.
NOTE: The toric sealing ring retainer must be
removed evenly or damage to the retainer will result.
8.
Remove the rubber toric sealing ring from the
metal floating ring.
9.
Remove the O-ring seal from the toric sealing ring
retainer.
10.
Remove the inner bearing cone (4) from the wheel
assembly.
11.
Remove bolts (7), locks (6) and the four plates
that hold hub assembly (5) and ring gear (8)
together.
12.
Remove hub assembly (5) from ring gear (8).
13.
Remove the bushing from hub assembly (5).
14.
Install four 3/8” - 16 NC forcing screws in hub
assembly (5). Tighten the forcing screws until
they make contact with bearing cone (9). Tighten
the forcing screws evenly to remove the bearing
cone from the nub assembly.
15.
Remove the inner and outer bearing cups (10)
from the wheel assembly.
3-270
