TM 5-3825-226-24
TRACTOR WHEEL ASSEMBLIES, BEARING AND SEALS
INSTALL WHEEL ASSEMBLIES,
BEARINGS AND SEALS
Tools Needed
A
B
C
D
E
2S8027
Seal Installer
1
1P531
Handle
1
1P524
Drive Plate
1
1P514
Drive Plate
1
FT524
Lifting Bracket
1
FT797
Lifting Bracket
1
5P2978
Spanner Wrench
1
1.
Lower the temperature of the inner and outer
bearing cups for the wheel assembly.
2.
Install outer bearing cup (1) in the wheel
assembly.
3.
Install the inner bearing cup in the wheel
assembly.
4.
Install the inner bearing cone in the wheel
assembly.
5.
Install the O-ring seal on the toric sealing ring
retainer.
6.
Install toric sealing ring retainer in the wheel
assembly.
NOTE:
The rubber seals and all surfaces that make
contact with the seals must be clean and dry. After
installation of the seals, put oil on the contact surfaces
of the metal seals.
7.
Install the two rubber toric sealing rings on the two
metal floating seals.
8.
Install the outer half of the Duo-Cone floating seal
in the wheel assembly with tool (A).
9.
Install the inner half of the Duo-Cone floating seal
on the spindle with tool (A).
10.
Install the bushing in the hub assembly with
tooling (B).
3-271