TM 5-3825-226-24
BRAKE CONTROL VALVE
8.
Remove snag ring (14) with tool (B). Remove
retainer (15) from piston (12). Use caution
because of the spring tension being the retainer.
9.
Remove spring (16) and O-ring seal (17) from
the piston. Check the condition of the seal. If
the seal has damage, use new parts for
replacement.
10.
Remove plunger (18) from top cover (19). The
plunger will slide out the bottom only. Check
the condition of the O-ring seal on the plunger.
If the seal has damage, use new parts for
replacement.
11.
Remove snap ring (21) with tool (A) from top
cover (19) Remove cap (20), the spring and the
plunger. Use caution because of the spring
tension behind the cap. Check the condition of
the three O-ring seals on the plunger. If the
seals
have
damage,
use
new
parts
for
replacement.
12.
Remove plugs (22), tie plungers and the springs
-from the top cover.
3-279
