TM 5-3825-226-24
BRAKE CONTROL VALVE
6.
Install O-ring seal (12) and spring (11) on piston
(13).
7.
Install retainer(15) in the piston. Install snap
ring (14) in the piston with tool (A).
8.
Put spring (16) and piston (13) in housing (17).
9.
Put gasket (18) in position on top housing (3).
Make sure identification marks are in alignment
and put top cover (3) on housing (17). Install
the three bolts.
10.
Install blades (19) on shaft (20). Install the shaft
in housing (17) as shown.
3-281
