TM 5-3825-226-24
WATER PUMP AND BRACKET ASSEMBLY
REMOVE WATER PUMP AND BRACKET
ASSEMBLY
WARNING: Release the pressure from the hydraulic
system before any work is done.
1. Remove the hydraulic motor (1).
2. Place a sling under the water pump (2) and attached
bracket assembly (3).
3. Support the unit securely with a crane or hoist.
4. Remove the pump inlet (front) coupling (4).
5. Remove the pump outlet (top) coupling (5).
6. Remove the two capscrews that secure the pump
front support (6).
7. Hoist the unit from the rear end frame and transport
it to a suitable work area.
INSTALL WATER PUMP AND BRACKET ASSEMBLY
1. Place a sling under the water pump (2) and attached
bracket assembly (3).
2. Hoist the unit carefully onto the rear end frame.
3. Connect the pump outlet (top) coupling (5).
4. Connect the pump inlet (front) coupling (4).
5. Secure the pump front support (6) with the two
capscrews.
6. Install the hydraulic motor (1).
7. Remove the sling.
6-26
