TM 5-3825-226-24
BRACKET ASSEMBLY
DISASSEMBLE BRACKET ASSEMBLY
1.
Remove the O-ring (15) and pump slinger(1).
2.
Remove the snap ring (12).
3.
Remove the pump shaft (13) with bearing ( 11)
from the adaptor bracket (2).
4.
Remove the coupling (14) from the shaft (13).
5.
Using a press, remove the bearing (11) from the
shaft (13).
6.
Remove the snap ring (8).
7.
Remove the seal (7).
8.
Remove the plugs (3) and pressure relief vent
(5) from the adaptor bracket (2).
9.
Remove the bushing (4) from the adaptor
bracket (2).
ASSEMBLE BRACKET ASSEMBLY
1.
Install the bushing (4) into the adaptor bracket
(2).
2.
Install the plugs (3) and pressure relief vent (5)
into the adaptor bracket (2).
3.
Install the seal (7).
4.
Install the snap ring (8).
5.
Using a press, install the bearing ( 1l) on the
shaft (13).
6.
Install the coupling (14) on the shaft (13).
7.
Insert the shaft assembly into the adaptor
bracket (2).
8.
Install the snap ring (12).
9.
Install the O-ring (15) and pump slinger (1).
6-29
