TM 5-3825-226-24
HOSE REEL AND SWIVEL JOINT, REEL BRAKE
REMOVE HOSE REEL AND SWIVEL JOINT
1.
Remove the hose nozzle and shutoff valve.
2.
Remove the hose guide.
3.
Disconnect the inlet elbow (1) at the swivel joint
(2).
4.
Remove the two bolts (3), lockwashers (4) and
nuts (5) that secure the swivel joint.
5.
Attach a sling to the hose reel handrails (6).
6.
Using a hoist or crane, support the hose reel
securely.
7.
Pull the hose reel away from the reel brake (7)
and transport it to a suitable work area.
INSTALL HOSE REEL AND SWIVEL JOINT
1.
Attach a sling to the hose reel handrails (6).
2.
Hoist the hose reel into position onto the rear
end frame.
3.
Insert the reel left hub into the reel brake (7) and
lower the swivel joint (2) to its mounting pad.
4.
Install the two swivel joint bolts (3), lockwashers
(4) and nuts (5).
5.
Remove the sling from the hose reel.
6.
Connect the inlet elbow (1) at the swivel joint
(2).
7.
Install the hose guide.
8.
Install the hose nozzle and shutoff valve.
REMOVE REEL BRAKE
1.
Remove the hose reel and swivel joint.
2.
Remove the two bolts (1), lockwashers (2) and
nuts (3) that secure the reel brake (4).
INSTALL REEL BRAKE
1.
Secure the reel brake (4) to the pedestal with
the two bolts (1), lockwashers (2) and nuts (3).
2.
Install the hose reel and swivel joint.
6-34
