TM 5-3825-226-24
LOW WATER LEVEL INDICATOR LAMP, FUEL FILTER
WARNING:
Disconnect
the
negative
battery
cable before any work is done.
REMOVE LOW WATER LEVEL INDICATOR LAMP
1.
Disassemble the air cylinder control panel (1).
2.
Disconnect the two lamp leads (2).
3.
Unscrew the lamp and socket (3) from the
panel.
INSTALL LOW WATER LEVEL INDICATOR LAMP
1.
Screw the lamp and socket (3) into the panel.
2.
Connect the two lamp leads (2).
3.
Assemble the air cylinder control panel (1).
REMOVE FUEL FILTER
1.
Disconnect and cap the two fuel lines (1), (2).
2.
Remove the two nuts (3) and lockwashers (4)
that secure the filter (5) to the mounting bracket
(6).
INSTALL FUEL FILTER
1.
Secure the filter (5) to the mounting bracket (6)
with the two nuts (3) and lockwashers (4).
2.
Uncap and connect the two fuel lines (1), (2).
DISASSEMBLE FUEL FILTER
1.
Remove the nut (1) and seal (2).
2.
Remove the case (3) and gasket (4).
3.
Remove the ring (5).
4.
Remove the element assembly (6).
ASSEMBLE FUEL FILTER
1.
Install the element assembly (6) in the case (3).
2.
Install the ring (5).
3.
Secure the case (3) with gasket (4) to the cover
with seal (2) and nut (1).
6-36
