TM 5-3825-226-24
RIM AND TIRE
REMOVE AND INSTALL RIM AND TIRE
Tools Needed
A
B
8S7610
Base Assembly
1
8S7650
Cylinder
1
SP3100
Pump Group
1
8S7640
Stand
1
8S7611
Tube
1
8S7615
Pin
1
1.
Lower the water distributor and put blocks in
front and behind the wheels.
2.
Put tooling (A) in the position shown and lift the
water distributor.
3.
Put tooling (B) under the water distributor frame
and lower the weight of the water distributor on
tooling (B).
4.
Remove tooling (A).
5.
Remove all but two of nuts (1) that hold the rim
to the wheel assembly.
6.
Loosen the last two nuts approximately .125 in.
(3.18 mm).
7.
Fasten the tire to a lift truck with a chain as
shown.
WARNING:
The tire can fall off of the lift truck.
Make sure the tire is fastened to the
lift truck.
8.
Remove the last two nuts that hold the rim and
tire in position. Remove the rim and tire.
Weight of the rim and tire is 925 lb. (421 kg).
9.
Fasten the rim and tire to a lift truck as shown.
WARNING:
Make sure the tire is fastened to the
lift truck.
10.
Put the rim and tire in position on the wheel
assembly.
11.
Install the nuts that hold the rim and tire.
12.
Remove the chain and lift truck.
13.
Tighten nuts (1) to a torque of 375 25 lb. ft.
(510 ± 35 N•m).
14.
Put tooling (A) in position and lift the water
distributor.
15.
Remove tooling (B), lower the water distributor
to the ground and remove tooling (A).
6-40
