TM 5-3825-226-24Every 2000 Service Hours or 1 Year7.Remove the inner seal and bearing.8.Repack the inner and outer bearings.9.Install the inner bearing and seal.10.Install the wheel on the spindle shaft.11.Install the outer wheel bearing.12.Install the outer washer, lockwasher and locknut.13.Tighten the locknut to 135 N.m (100 lb ft), whileturning wheel hub, to seat bearing.14. Loosen the locknut. Retorque it to 25 to 70 N.m (20to 50 lb ft). Bend the lockwasher tang to secure locknut.15. Install the hub cap.Steering MechanismInspect - Repair1.Inspect links for wear, loose pins and loose bolts.Repair or replace if necessary.2.Secure a straight metal bar to the lift truck frame.When in a straight ahead position, both steer wheelsmust be parallel with the frame.7-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business