TM 5-3825-229-14&P
4-11. CONTROL PANEL GAUGES (cont)
d. Removal of Ammeter (cont).
(3)
Remove nuts (5) and washers (6) from
clamp (7) holding ammeter (8) to panel
(2).
(4)
Remove clamp (7) and slide ammeter (8)
out through hole in panel.
e. Installation of Tachometer.
(1)
Insert tachometer (8) through hole in
panel (2).
(2)
Install clamp (7) over bolts on back of
tachometer (8). Secure with nuts (5) and
washers (6).
(3)
Install wires (3) on tachometer terminals
(4).
(4)
Close panel (2) and install two screws (1).
(5)
Test tachometer as described above.
(6)
Refer to para. 4-22 and connect battery
cables.
f. Installation of Ammeter:
(1)
Insert ammeter (8) through hole in panel (2).
(2)
Install clamp (7) over bolts on back of ammeter (8). Secure with nuts (5) and washers (6).
(3)
Install wires (3) on ammeter terminals (4).
(4)
Close panel (2) and install two screws (1).
(5)
Test ammeter as described above.
4-20
