TM 5-3825-229-14&P
4-54. THROTTLE CONTROL ACTUATOR (cont)
c.
Installation.
(1)
Install actuator assembly (4) on bracket (8), securing with screw (6) and nut (7).
(2)
Install screw (3) and lock nut (2) through actuator shaft and throttle lever (5).
(3)
Install wires (1) on motor tabs by sliding lugs over tabs. Be sure to observe correct polarity
when installing wires.
(4)
Adjust throttle control actuator for idle speed as described in para. a. above.
4-117
