ENGINE HOUSING, RADIATOR SHROUD AND RADIATOR (cont)

ENGINE HOUSING, RADIATOR SHROUD AND RADIATOR

ENGINE HOUSING, RADIATOR SHROUD AND RADIATOR (cont) - TM-5-3825-229-14P_213

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
194

TM 5-3825-229-14&P 4-56. ENGINE HOUSING, RADIATOR SHROUD AND RADIATOR (cont) a. Enqine Housinq (cont). (1) Removal. WARNING Electrical shock hazard exists. Disconnect battery cables (para. 4-22). (a) Remove cover (1) from muffler exhaust pipe (2). (b) Release latches (3) on engine door (4). (c) Remove fourteen screws (5) and flat washers (6) from top and sides of engine roof (7). (d) Remove housing roof (7). (e) Remove four screws (1 0), lockwashers (1 1) and nuts (1 2) holding relay panel (1 3) to rear housing (14). Rest relay panel on engine base. (f) Remove hose (9) from intake manifold. (g) Remove four screws (1 5) and lockwashers (1 6) holding rear housing (1 4) to shock mount brackets (17). Remove rear housing. (h) Remove four screws (18) and lockwashers (19) holding radiator housing (20) to brackets. Remove radiator housing. (2) Installation. (a) Install and secure radiator housing (20) to brackets with bolts (1 8) and lockwashers (1 9). (b) Secure rear housing (14) to shock mount brackets (17), using screws (15) and lockwashers (16). (c) Install hose (9) and connect to intake manifold. (d) Secure relay panel (13) to rear housing (14) with screws (10), lockwashers (11) and nuts (12). (e) Install engine housing roof (7). Secure roof to radiator housing (20) and rear housing (14), using screws (5) and flat washers (6). (f) Install engine door (4); secure with latches (3). (g) Install exhaust cover (1) on muffler exhaust pipe (2). 4-120

Privacy Statement
Press Release
Contact