SPRAY NOZZLES (cont) - TM-5-3825-229-14P

SPRAY NOZZLES (cont) - TM-5-3825-229-14P_237

Section XIII. PREPARATION FOR STORAGE AND SHIPMENT

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
220

TM 5-3825-229-14&P 4-63. SPRAY NOZZLES (cont) e. Installation. (1) Screw nozzle (3) fully in elbow (4), then back off at least one turn so that nozzle (3) spray slit is parallel to ground. (2) Unscrew ring (2) until it contacts elbow (4) and secure with set screws (1). (3) Refer to para. 2-6 and couple semitrailer to prime mover. Operate prime mover to pressurize air system. (4) Refer to para. 2-20 and fill water tank. 4-64. DISCHARGE VALVE THIS TASK COVERS: a. Removal b. Installation Equipment Materials Required: INITIAL SETUP: Pipe Sealant (Item 11, Appendix E) Tools Required: Equipment Conditions: Nomenclature: Ref Conditions General Mechanics 1-10. b. (2) Air reservoirs drained Tool Kit 2-14 Engine shut off 2-21 Water tank drained a. Removal. (1) Close fill valve (1). (2) Remove cap (4) from discharge valve (2). (3) Use a 2-1/4 inch open-end wrench to unscrew discharge valve (2) from header (3). Remove discharge valve (2). b. Installation. (1) Coat inside threads of discharge valve with pipe sealant (Item 11, Appendix E). (2) Install discharge valve (2) on header (3). 4-146

Privacy Statement
Press Release
Contact