TM 5-3825-229-14&P
5-19. WATER DISTRIBUTION PUMP (cont)
a. Removal (cont).
Remove and Install Water Distribution Pump
(2) Remove eight nuts (1), lockwashers (2) and screws (3) holding butterfly suction valve (4) in pipes. Remove
valve.
(3) Remove eight nuts (5), lockwashers (6) and screws (7) holding discharge header (8) to discharge flange.
(4) Remove eight screws (10) and lockwashers (11) securing adapter (20) to engine flywheel housing.
(5) Remove two nuts (16) and remove U-bolt (17) from discharge header (8).
(6) Remove two bolts (13) and lockwashers (14) securing pump support bracket (15) to bottom of pump.
WARNING
Do not allow pump to swing freely. To avoid injury, use two persons to guide pump by hand, while crane lifts
unit off semitrailer.
5-53
