TM 5-3825-229-14&P
5-17. FUEL TRANSFER PUMP (cont)
b. Installation.
(1) Install pump rod in engine. Install new fuel transfer pump gasket (7) on engine. Install fuel transfer pump (6).
(2) Install three screws (5) through pump mounting holes and into engine block.
(3) Torque three screws (5) to 18 Ib-ft (11 Nm) (wet).
(4) Install elbow (2) in pump and connect inlet line (1) to elbow.
(5) Install elbow (4) in pump and connect outlet line (3) to elbow.
(6) Refer to para. 4-53 and prime fuel system.
(7) Refer to para. 4-56 and install engine door.
5-18. ENGINE WATER PUMP
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
Tools Required:
Equipment Conditions:
Nomenclature:
Ref
Conditions
General Mechanics
2-14
Engine shut off
Tool Kit
4-46
Drain cooling system
4-46A
Thermostat and cooling lines removed
Equipment/Materials Required
4-56
Radiator removed
4-57
Fan, fan belt and spacer removed
Rags (Item 6, Appendix E)
Antifreeze (Item 1, Appendix E)
Grease (Item 8, Appendix E)
WARNING
Be sure cooling system has cooled completely before starting work.
a. Removal.
(1) Remove screw (1) and washer (2) and remove pulley (3) from water pump (4).
(2) Remove three screws (5) and washers (6) and remove water pump (4) from engine.
5-50
