TM 5-3825-229-14&P
5-16. FUEL INJECTION PUMP (cont)
b. Installation and Timing.
(1) Remove plug. Rotate engine in a clockwise direction (viewed from front) until timing pointer on flywheel lines
up with center of timing indicator.
NOTE
Number one piston must be on the compression stroke to time injection pump.
(2) Install fuel injection pump onto engine with mounting studs located in centers of injection pump mounting slots.
(3) Install three nuts (4) and three washers (5) and tighten. Do not torque nuts at this time.
(4) Clean dirt and foreign material from around timing window cover on injection pump.
(5) Remove two screws from timing window cover on fuel injection pump and remove timing window cover with
gasket.
NOTE
Rotate the cam ring by rotating the injection pump shaft. Rotate the governor weight retainer with a clean awl
or scribe through the timing window.
Governor weight retainer must be manually positioned in the counterclockwise direction (viewed from front).
5-45
