TM 5-3825-229-14&P
6-7. GEARCASE COVER (cont)
b. Installation.
(1) Remove any burrs from crankshaft sealing surface.
(2) Coat crankshaft lightly with lubricating oil (OE/HDO).
(3) Install new gasket (7) on backplate.
(4) Install gearcase cover (4) on backplate and secure with screws (5) and washers (6). Torque screws to 17 Ib-ft
(23 Nm) (wet).
(5) Install packing (8) and pump gear cover plate (3) on gear case cover and secure with washers (2) and screws
(1). Tighten screws to a torque of 17 Ib-ft (23 Nm) (wet).
(6) Tighten oil pan screws (para. 5-11).
(7) Install crankshaft pulley (para. 5-8).
(8) Install alternator and alternator bracket (para. 4-58).
6-8. GEAR TRAIN AND BACKPLATE
THIS TASK COVERS:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP:
Equipment/Materials Required:
Tools Required:
Lubricating Oil (Item 10, Appendix E)
Nomenclature
Equipment Conditions:
General Mechanics
Ref
Conditions
Tool Kit
5-12
Oil pump and gear removed
Gear Puller
5-11
Oil pan and oil pickup tube removed
5-7
Cylinder head removed
Personnel Required: 1
5-16
Fuel injection pump and
drive gear removed
5-17
Fuel transfer pump removed
6-7
Gearcase cover removed
6-13
Camshaft and camshaft gear removed
6-13