TM 5-3825-229-14&P
6-16. UPPER KING PIN PLATE (cont)
a.
Removal (cont).
CAUTION
Weight of upper king pin plate is 550 lb. (1210 kg). Be sure adequate blocking or jack stands
are used to support the plate.
(2) Position jack stands or blocking to support the upper king pin plate as shown.
(3) Refer to TM 43-0139 and remove CARC paint from weld areas where upper king pin plate
is welded to tank.
CAUTION
When cutting the welds to free the plate, avoid damage to the pads on the tank.
NOTE
The welder performing the task to remove and install the upper king pin plate must be certified
in overhead welding.
(4) Use a cutting torch and cut the welds attaching the bolsters and side plates as close as
possible to the tank. Leave the tank pads intact.
6-55
