TM 5-3895-370-14&P
4-24. ENGINE OIL CHANGE/SERVICE (CONT).
(2)
Remove drain plug (3) and washer (4)
from oil pan (5). Discard washer.
(3)
Drain oil in suitable container and dispose
of in accordance with local regulations.
b.
Cleaning/Inspection.
CAUTION
Dirt, grit, and metallic particles can
cause damage to engine. Drain plug
and hole should be clean before plug
is installed.
(1)
Clean threads of magnetic oil drain plug
and inspect for damage.
(2)
Clean oil pan drain hole and inspect for
damaged threads.
c.
Installation.
(1)
Install washer (4) and drain plug (3) on oil
pan (5). Tighten drain plug 30 lb-ft (41
Nm).
(2)
Fill engine with 10 qt (9.51) of engine oil in
filler tube (2).
(3)
Install cap (1) on filler tube (2).
(4)
Start engine and allow to run for 5 minutes
to circulate oil.
NOTE
Follow-on maintenance:
·
Inspect for oil leaks.
·
Install front engine panel (para 3-
6).
·
Install spare tire (para 4-110).
END OF TASK
4-50
