TM 5-3895-370-14&P
4-28. OIL FILLER TUBE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Shop equipment, automotive maintenance and
TM or Para
Condition Description
repair: organizational maintenance supplemental
Wheels chocked.
no. 1, less power
Para 2-10
Extension jack lowered.
Para 3-6
Front engine panel
Shop equipment, automotive maintenance and
removed.
repair: organizational maintenance common
no. 1, less power
General Safety Instructions
If engine has previously been in operation, allow
Materials/Parts
time for cooling before performing procedure.
Filler tube gasket
a.
Removal.
(1)
Remove two screws (1) and filler tube (2)
from cylinder block (3).
(2)
Remove and discard gasket (4) from filler
tube (2).
(3)
Remove cap (5).
b.
Installation.
(1)
Install cap (5) and gasket (4) in filler tube
(2).
(2)
Install filler tube (2) on cylinder block (3)
with two screws (1). Tighten screws 32 lb-
ft (43 Nm).
NOTE
Follow-on maintenance: Install front
engine panel (para 3-6).
END OF TASK
4-57
