ENGINE OIL FILTER HEAD AND COOLER REPLACEMENT (cont)

ENGINE OIL FILTER HEAD AND COOLER REPLACEMENT

ENGINE OIL SAMPLING VALVE AND LINES REPLACEMENT

TM-5-3895-370-14P Spreader Aggregate: Towed; 3 Ft Spread FF-8 (NSN 3895-01-329-5096) Manual
Page Navigation
200

TM 5-3895-370-14&P 4-31. ENGINE OIL FILTER HEAD AND COOLER REPLACEMENT (CONT). a. Removal (1) Remove 14 screws (1) from filter head (2). (2) With a soft hammer, gently tap filter head (2) and remove from engine block (3). (3) Remove filter head gasket (4), cooler core (5), and cooler core gasket (6) from engine block (3). Discard gaskets. b. Installation. CAUTION Remove protective plugs from new cooler core before installation or damage to engine will result. (1) Install filter head gasket (4), cooler core (5), and cooler core gasket (6) on filter head (2). (2) Install two screws (1), one in center and one at top, in filter head (2) to align screw holes. (3) Install filter head (2) and assembly on engine block (3) with remaining 11 screws (1). Tighten 14 screws 18 lb-ft (24 Nm). NOTE Follow-on maintenance: · Install alternator (para 4-63). · Install oil filter (para 4-30). END OF TASK 4-62

Privacy Statement
Press Release
Contact