TM 5-3895-370-14&P
(2)
Inspect belt tensioner (1) by rotating pulley. If
belt tensioner rotates with no rough spots, do
not replace.
(3)
Remove screw (3) and belt tensioner (1).
(4)
Remove two screws (4) and bracket (5) from
cylinder block (6).
b. Installation.
(1)
Install bracket (5) on cylinder block (6) with two
screws (4).
(2)
Install screw (3) and belt tensioner (1). Tighten
screw to 32 lb-ft (43 N.m).
WARNING
Use caution when installing drive
belt. Belt tensioner is extremely rigid
and can cause injury to personnel.
(3)
Unload belt tensioner (1) in direction indicated
and install belt (2) on belt tensioner.
NOTE
Follow-on maintenance: Install fan
guard (para 4-54).
END OF TASK
4-151
