TM 5-3895-370-14&P
(3)
Remove screw (6) from alternator (4).
(4)
Remove screw (7) and alternator (4) from
support (8).
b. Installation.
(1)
Install alternator (4) and screw (7) on support
(8).
NOTE
If the brace under alternator has been
removed, tighten screw on brace 18
lb-ft (24 N.m).
(2)
Install screw (6). Tighten screw (6) 18 lb-ft (24
N.m) and screw (7) 32 lb-ft (43 N.m).
(3)
Connect connector (5) on alternator (4).
(4)
Install two wires (3), lockwasher (2), and nut (1)
on alternator (4).
NOTE
Follow-on maintenance: Install drive belt (para 4-61).
END OF TASK
4-153
