TM 5-3895-370-14&P
4-84. BATTERY CABLE REPLACEMENT (CONT).
(10)
Remove nut (18) and positive cable (12) from
starter solenoid (19).
b.
Installation.
(1)
Install positive cable (12) and nut (18) on starter
solenoid (19).
(2)
If removed, install clip (15) on negative cable (4).
(3)
Install ground wire (16), negative cable (4), clip
(15), and screw (14) on flywheel cover (17).
(4)
Install positive dual cable (12) on battery (10).
Tighten nut (13).
(5)
Lower cover (11) on positive dual cable (12).
(6)
Install cross-over cable (8) on two batteries (6
and 10). Tighten two nuts (9).
(7)
Install two caps (7) on crossover cable (8).
4-222
