TM 5-3895-370-14&P
4-85. ENGINE WIRING HARNESS REPLACEMENT (CONT).
(4)
Remove screw (7), two washers (8), clamp (9),
wire harness (5), and ground wire (10) from
cylinder block (11).
(5)
Remove wire harness (5) from clamp (9).
(6)
Remove nut (12), three wires (13) and positive
battery cable (14), from starter solenoid (15).
(7)
Remove nut (16), lockwasher (17), and wire (18)
from starter solenoid (15). Discard lockwashers.
(8)
Remove four nuts (19), lockwashers (20), and
wires (21) from engine solenoid (22). Discard
lockwashers.
4-226
