TM 5-3895-370-14&P
4-105. AIR HOSES AND FITTINGS REPLACEMENT (CONT).
a. Removal.
(1)
To remove a typical air hose, proceed as
follows: Loosen hose fitting (1) and remove
hose (2) from air relay valve (3), or point of
connection.
(2)
To remove a typical fitting, proceed as follows:
If necessary, remove air relay valve (3) from air
tank (5), then remove fitting (4) from air relay
valve (3).
b. Installation.
(1)
To install a typical fitting, proceed as follows:
Install fitting (4) on air relay valve (3), then install
air relay valve (3) on air tank (5).
(2)
To install a typical air hose, proceed as follows:
Install hose (2) on air relay valve (3), or point of
connection. Tighten fitting (1).
4-282
