TM 5-3895-370-14&P
4-108. HUB ASSEMBLY AND DRUM REPLACEMENT.
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools
Materials/Parts-Continued
Tool kit, general mechanic's: automotive
Wooden block 2x6
Preformed packing
Socket, 2-1/2 in.
Oil seal
Suitable container (4 qt [3.81] capacity)
Personnel Required
MOS 62B, Construction equipment repairer (2)
Wrench, torque
Equipment Condition
Materials/Parts
TM or Para
Condition Description
Brush, stiff bristle (item 6, Appendix E)
Para 4-107
Wheel removed.
Compound, sealing (item 16, Appendix E)
Para 4-98
Brake chamber(s)
caged.
Grease (item 23, Appendix E)
Para 3-14
Oil drained.
Rags, wiping (item 47, Appendix E)
Solvent, drycleaning (item 50, Appendix E)
a. Removal.
WARNING
Oil is very slippery and can cause
falls. To avoid injury, wipe up spilled
oil with rags.
NOTE
Restrain drum while removing oil cap
from hub.
(1)
Remove oil cap (1) from hub (2).
(2)
Remove rubber plug (3) and preformed packing
(4) from oil cap (1). Discard preformed packing.
(3)
Bend tang washer (5) back from nut (6).
(4)
Remove two nuts (6), tang washer (5), and
spindle washer (7) from axle (8).
4-288