TM 5-3895-370-14&P
4-108. HUB ASSEMBLY AND DRUM REPLACEMENT (CONT).
NOTE
Ensure inner tangs on spindle and
tang washers are alined with slot in
axle.
(6)
Install spindle washer (7), tang washer (5), and
two nuts (6). Rotate hub (2) slowly and tighten
nut 50 lb-ft (68 Nm).
(7)
Loosen nut (6) 1/8 turn and bend three tangs on
tang washer (5) on nut.
NOTE
Apply
light
coat
of
grease
on
preformed packing before installing.
(8)
Install preformed packing (4) and rubber plug (3)
on oil cap (1).
(9)
Install oil cap (1) on hub (2). Tighten cap 20 to
30 lb-ft (27-41 Nm).
NOTE
Follow-on maintenance:
·
Uncage brake chamber(s) (para 4-
98).
·
Install wheel (para 4-107).
·
Fill hub with oil (para 3-14).
END OF TASK
4-292
