TM 5-3895-370-14&P
4-128. SPARE TIRE REPLACEMENT (CONT).
NOTE
Ensure there is enough slack in the
cable after lowering the wheel to the
ground.
(3)
Turn lever (4) counterclockwise and lower wheel
(2) to ground.
(4)
Remove two retainer pins (7) from winch bracket
(8).
(5)
Remove winch bracket (8) through wheel (2).
b. Installation.
(1)
Install winch bracket (8) through wheel (2).
(2)
Install two retainer pins (7) on winch bracket (8).
(3)
Turn lever (4) clockwise and raise wheel (2) to
anchor bracket (3). Aline studs with wheel.
(4)
Lower latch (5) on gear (6).
NOTE
Ensure flanged end of nuts are
installed against hub.
(5)
Install three nuts (1) on wheel (2) anchor bracket
(3).
END OF TASK
4-294
