TM 5-3895-370-14&P
4-112. REAR BUMPER REPLACEMENT (CONT).
NOTE
There
are
two
wiring
harness
attached to the rear bumper (left and
right sides). The following steps are
for the installation of one harness.
To install remaining harness, repeat
Step (3) below.
(3)
Install wiring harness (1) to rear bumper (2) as
follows:
(a)
Install screw (12), lockwasher (10), clamp
(11) and wiring harness (1), and nut (9) on
rear bumper (2).
(b)
Install lockwasher (7), clamp (8), and
wiring harness (1), and nut (6) on rear
bumper (2).
(c)
Install clamp (5), wiring harness (1),
lockwasher (4), and nut (3) on rear
bumper (2).
NOTE
Follow-on maintenance:
·
Install markerlight/reflectors (para
4-77).
·
Install taillights (para 4-81).
·
Connect negative battery cable
(para 4-84).
END OF TASK
4-298
