TM 5-3895-370-14&P
(10)
If damaged, remove locknut (20), screw (21),
and handle (22) from handle rod (17). Discard
locknut.
(11)
Remove hair pin (23), anchor pin (24), and
pulley (10) from yoke (25). Discard hair pin.
(12)
Remove screw (26), lockwasher (27), washer
(28), and yoke (25) from winch bracket (29).
Discard lockwasher.
b.
Installation.
(1)
Install yoke (25) on winch bracket (29) with
washer (28), lockwasher (27), and screw (26).
(2)
Install pulley (10) on yoke (25) with anchor pin
(24) and hair pin (23).
(3)
If removed, install handle (22), screw (21), and
locknut (20) on handle rod (17).
(4)
Install handle rod (17) in main frame (4) and
spool (12)
(5)
Install coupling (19) on handle rod (17). Tighten
setscrew (18).
(6)
Install roll pin (16) in spool (12) and handle rod
(17).
4-303
