TM 5-3895-370-14&P
4-139. HYDRAULIC FLUID COOLER REPLACEMENT (CONT).
a. Removal.
WARNING
Hydraulic fluid is very slippery and
can cause falls. To avoid injury, wipe
up spilled fluid with rags.
CAUTION
Equipment damage may occur if
hydraulic lines and fittings are not
plugged and capped after removal.
NOTE
Tag and mark all hydraulic lines
before removal.
(1)
Place suitable container under cooler assembly
(1).
(2)
Remove two hoses (2) from cooler assembly (1).
(3)
Remove four nuts (3), lockwashers (4), washers
(5), screws (6), and cooler assembly (1) from
radiator support (7). Discard lockwashers.
(4)
Remove suitable container and dispose of
hydraulic fluid in accordance to local regulations.
4-368
