TM 5-3895-370-14&P
b. Installation.
WARNING
Lower linkage is supported by the
clevis pin and is free to fall when
clevis pin is removed. Support lower
linkage prior to removing clevis pin.
Failure to comply may result in
equipment damage, personnel injury,
or death.
(1)
With aid of assistant, install raise/lower cylinder
(3) in lower linkage (13) and swivel block (14).
(2)
Install clevis pin (12) through lower linkage (13),
swivel block (14) and raise/lower cylinder (3).
(3)
Install washer (11) and cotter pin (10) on clevis
pin (12).
WARNING
Cylinder is supported by the clevis
pin and is free to fall when clevis pin
is removed. Support raise/lower
cylinder when clevis pin is removed.
Failure to comply may result in
equipment damage, personnel injury,
or death.
(4)
With aid of assistant, position
raise/lower
cylinder (3) in upper linkage (9).
(5)
Install clevis pin (8), two washers (7), and two
cotter pins (6).
4-373