TM 5-3895-370-14&P
4-139. HYDRAULIC FLUID COOLER REPLACEMENT (CONT).
(3)
Remove plugs from cooler coil and flush cooler
coil with clean hydraulic oil. Inspect for leaks.
(4)
Inspect all parts for rust, cracks, and wear.
(5)
Replace all parts failing inspection.
(6)
Install plugs in cooler coil.
d.
Assembly. Install screen (5) on cooler coil (6) with
two angle brackets (4), four u-bolts (3), eight
washers (2), and 16 nuts (1).
e. Installation.
(1)
Install cooler assembly (1) on radiator support
(7)
with
four
screws
(6),
washers
(5),
lockwashers (4), and nuts (3).
WARNING
Adhesive sealant, MIL-S-46163, can
damage your eyes. Wear safety
goggles/glasses when using; avoid
contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
NOTE
·
Remove plugs and caps prior to
installing hoses.
·
Apply hydraulic sealant to hose
threads.
(2)
Install two hoses (2) on cooler assembly (1).
NOTE
Follow-on maintenance: Install rear
fan guard (para 4-54).
END OF TASK
4-370
