TM 5-3895-370-14&P
5-13. INSTALLATION/REMOVAL OF ENGINE ON STAND.
This task covers:
a. Installation
b. Removal
INITIAL SETUP
Tools
Personnel Required
Tool kit, general mechanic's: equipment
MOS63W, Wheel vehicle repairer (2)
maintenance and repair
Equipment Condition
Suitable lifting device [1500 lb (680 kg) capacity]
TM or Para
Condition Description
Para 5-12
Engine removed.
Stand, engine
Para 5-20
Flywheel housing
removed.
a.
Installation.
WARNING
Engine weighs 1025 lbs (465 kg).
Attach suitable lifting device prior to
removal to prevent possible injury to
personnel.
(1)
With aid of assistant, install engine (1) on
stand with four washers (2) and screws
(3).
(2)
Remove lifting device from two engine
lifting brackets (4).
b.
Removal
(1)
Install suitable lifting device on two engine
lifting brackets (4).
(2)
With aid of assistant, remove four screws
(3) and washers (2) from engine.
NOTE
Follow-on maintenance:
·
Install flywheel housing (para 5-
20).
·
Install engine (para 5-12).
END OF TASK
5-29
