TM 5-3895-370-14&P
(2)
Install front engine mount:
(a)
Install vibration isolator (4) on bracket (7).
(b)
Install bracket (7) on engine block (8) with two washers (6) and capscrews (5).
(c)
Install washer (3) and capscrew (2) on vibration isolator (4).
(3)
Remove lifting device from engine lifting brackets (1).
NOTE
Follow-on maintenance:
·
Install engine fuel feed and return lines (para 4-41).
·
Install water temperature sensor (para 4-148).
·
Install engine oil pressure line (para 4-146).
·
Install battery cable on flywheel housing (para 5-39).
·
Install engine ground wire (para 4-86).
·
Install engine wire harness (para 4-85).
·
Install engine oil sampling lines (para 4-32).
·
Install engine cowlings (para 4-118).
END OF TASK
5-33
