TM 5-3895-370-14&P
a.
Removal.
NOTE
·
The following procedure applies to both left and right engine mounts.
·
This replacement procedure is intended to be accomplished without removing
engine from vehicle.
WARNING
Engine weighs 1025 lbs (465 kg). Attach suitable lifting device to prevent possible
injury to personnel or damage to engine.
(1)
Attach suitable lifting device to engine lifting brackets (1).
(2)
Raise lifting device until there is no slack in lifting chain.
(3)
Remove front engine mount:
(a)
Remove capscrew (2) and washer (3) from vibration isolator (4).
(b)
Remove two capscrews (5), washers (6), and bracket (7) from engine block (8).
(c)
Remove vibration isolator (4) from bracket (7).
5-31
