TM 5-3895-370-14&P
(c)
Remove spring (45) from rear deck plate
(46).
(d)
If damaged, loosen clamp (47) and
remove spring (45) and clamp (47) from
hose (43).
(e)
Loosen nut (48) and remove female union
halve (49) and hose (43) from male union
halve (50).
(f)
If damaged, removed female union halve
(49) from hose (43).
b.
Installation.
WARNING
Adhesive causes immediate bonding
on
contact
with
eyes,
skin,
or
clothing and also gives off harmful
vapors. Wear protective goggles and
use
in
well-ventilated
area.
If
adhesive gets in eyes, try to keep
eyes open; flush eyes with water for
15
minutes
and
get
immediate
medical attention.
NOTE
Apply sealant compound to threads
of piping prior to installation.
(1)
Install hose on spraybar to pipes as follows:
(a)
If removed, install female union halve (49)
on hose (43).
(b)
Install hose (43) and female union halve
(49) on male union halve (50). Tighten
nut (48).
(c)
If removed, install clamp (47) and spring
(45) on hose (43). Tighten clamp.
(d)
Install spring (45) on rear deck plate (46).
5-207
